Skip to content Skip to sidebar Skip to footer
Home / Sea Gull Lighting 16148bl Ceiling Fan Light Kit

Sea Gull Lighting 16148bl Ceiling Fan Light Kit

Post a Comment

Available in Two Size Deuce Colors

L-CONNECT SOFTWARE FOR
A MORE INTUITIVE FAN CONTROL

With the toggle of a switch, changing control between motherboard software program and the L-Get in touch is a zephyr.

Run L-Connect as administrator
We recommend updating the latest version and update the firmware of the controller to heighten your overall know.

When L-Connect john't control the fan speed and light personal effects, please download the pickle.

  1. Unplug the USB and SATA Cable of the UNI HUB
  2. Close and exit MSI dragon essence and L-connect software.
  3. Download L-Connect Fix , and run UP_MousePad.bat
  4. To check if information technology is downloaded aright, please direct to your download file see details and break if the file interlingual rendition is 1.0.3.0
  5. Plug back the USB and SATA cables and reboot the system.

Note : Delight do not download any software regarding L-Connect update apart from LIAN LI internet site. This might occur UNI HUB(Controller) disfunction.

NOTE

  1. Purchase a three-pack SL120 or a two-ingroup SL140(including a comptroller) A the starter outfit for fully experienced UNI FANs with L-Connect. To control whol 16 UNI FANs (4 fans each cluster) in incomparable go, a accountant is needed, irrespective ascertain with L-Link up software or sync to the motherboard. Please note that the single-pack version does not contain this controller.
  2. Please go into your motherboard BIOS and set the correspondent lover lintel at PWM modality. (Update your motherboard BIOS if necessary)
  3. Do not connect more than 10 UNI FANs (device up to 21W) to the controller (UNI HUB) when performing white static color. To connect more devices, please update to L-Connect 2 (reference to update guide) and use 2 or more controllers.
  4. Listed radiators are known not harmonious with UNI Rooter.
    1. Arctic Tearful Freezer II Serial
    2. CORSAIR iCUE H115i RGB PRO XT Clear CPU Cooler
    3. CORSAIR Hydro Serial publication™ H110i GT 280mm Extreme Carrying into action Liquid CPU Ice chest
    4. Radiators that doesn't follow bellow rule:
      Rule 1// The tubes of the radiator moldiness avoid the tenon of the UNI FAN and exist at the safe area, which is in grey in the trope.

Rule 2// The screw holes between the two fans must be 15mm width happening the radiator for either 120mm Beaver State 140mm UNI FAN.

  • Check your "Computer Management" → "Device Manager"
  • If your MB detected UNI FAN, it would show "LIAN LI" under "Universal proposition Serial Bus Twist"
  • If there are error low "Universal Serial Bus Controllers", please contact your MB company for help oneself.
  • Check if all 3 cables of the control are correctly connected to the MB. Switch another USB2.0 header if necessary.
  • If you can see "LIAN Li" at the device manger, re-install your L-Connect as an Administrator.
  • The settings are written in L-Connect package, you give to run L-Connect to get your settings.
  • Please set L-Connect running Eastern Samoa the estimator starts. Shadowing steps:
    1. Click "Windows" + "R"
    2. Enter : "shell:inauguration"
    3. Click "Fine"
    4. Copy your "L-Connect" to "Startup" file
    5. Restart your PC
  • Recommend you link up the controller's PWM cable to the system/build sports fan header (non the CPU nor ticker buff lintel).
  • You could wire the fan's PWM line to the CPU header directly if you use UNI FANs for your AIO.
  • Delight enter your MB BIOS to check if your fan header is at PWM style (not DC mode nor Auto fashion).

Please fall out bellow stairs to work out the problem.
1. Remove L-Connect software and reboot
2. Close MSI Dragon center software and install this Fix Software and boot
3. Re-set up L-Connect

  1. Please make a point that your personal computer experience detected [LIAN Li] from Gimmick Manager
  2. Attend [ C:\Program Files\East northeast\Aac_ENE_MousePad_HAL ]
  3. Right chatter [ AacHal_x64.dll ], run short to [ Properties ] and check Mouse mat Reading
  4. MousePad version shall beryllium [ 1.0.3.0 ], if non please leave all the RGB controlling package in your system, including L-Connect, and download L-CONNECT Secure
  5. Run [ UP_MousePad.bat ]
  6. Discipline the File variation again, shall be [ 1.0.3.0 ] to clear the interference. If not, please run [ UP_MousePad.bat ] again.
  7. After updating the software, please reboot your PC.

Substance abuser MANUAL DOWNLOAD

SPECIFICATIONS

Mock up UNI FAN SL120 UNI Lover SL140
Fan Dimension 120 X 120 X 25 ( mm ) 140 X 140 X25 ( millimeter )
Rated Potential difference Direct current 12V(FAN) &adenylic acid; 5V(LED) Direct current 12V(FAN) &ere; 5V(LED)
Buff Speed 800~1900RPM 500~1500RPM
Max. Air Pressure 2.54mmH2O 1.67mmH2O
Max. Air Flow 58.54CFM 70.5 CFM
Acoustical Noise (Min-Liquid ecstasy.) 31dB(A) Max 30dB(A) Georgia home boy
Locked Current >= 50mA >= 10mA
Bearing Type Fluid Dynamic Bearing(FDB) Fluid Dynamic Bearing(FDB)
Start-up Voltage DC 6.0V DC 6.0V
Input Current 180mA(FAN) /600mA (LED) 100mA(FAN) / 340mA (LED)
Stimulant Power 5.16Watt 3.6W
Warranty 2 year 2 year

Sea Gull Lighting 16148bl Ceiling Fan Light Kit

Source: https://lian-li.com/product/uni-fan-sl/

Post a Comment for "Sea Gull Lighting 16148bl Ceiling Fan Light Kit"